Arc-Flash Calculator - Littelfuse (2024)

  • Home
  • > Marketing Pages
  • > Industrial
  • > Arc-Flash Knowledge Center

Arc-Flash Calculator - Littelfuse (1)

Use this arc-flash energy reduction calculator to see how you can
reduce incident energy in your panel by adding an arc-flash relay
to your system.

  • Knowledge Center
  • What is an arc flash?
  • What applications use arc-flash relays?
  • Case study
  • Selecting an arc-flash relay
  • Arc-flash calculator
  • Arc-flash relay videos
  • Products and datasheets
  • Codes and standards

The purpose of this calculator is to help the plant engineer or electrician create a preliminary calculation of the reduction of Incident Energy (IE) by applying the PGR-8800 Arc-Flash Relay. All nameplate data should be collected by a qualified individual. The calculations below provide a typical-case scenario in 3-phase systems, as defined by IEEE 1584 calculations, and are for illustration purposes only. Actual values may vary.

Instructions

Please fill in the values in the green shaded boxes only. The values shaded in gray will calculate automatically.

  1. Select your Equipment Voltage
  2. Select your Equipment Class
  3. Indicate whether you know your Circuit Breaker (CB) Clearing Time number
  4. Indicate your Circuit Breaker(CB) Total Clearing Time
  5. Enter your Available Bolted Fault Current
  6. Enter your Incident Energy for Instantaneous

Note the New Incident Energy (NIE) Value — this is what your your Incident Energy will be by applying the PGR-8800 in your system.

Oops... the following errors were encountered:

1. Equipment Voltage

2. Equipment Class

3. Circuit Breaker (CB) Clearing Time

4. Calculate New CB Clearing Time (NCBCT)

ms

+

ms

=

ms

ms

ms

+

ms

=

ms

ms

ms

+

ms

=

ms

ms

ms

+

ms

=

ms

ms

5. Enter your Available Bolted Fault Current at the Load (SCC)

Change SCC Value

kA

kA

6. New Incident Energy (NIE) value WITH the PGR-8800 Arc Flash Relay

cal/cm2

%

%

%

7. Incident Energy with current protection

Change IE Value

8. Enter Known Incident Energy (IE) with current protection

cal/cm2

cal/cm2

cal/cm2

cal/cm2

9. Percent Reduction in Incident Energy by applying PGR-8800

%

%

%

%

%

%

%

Note: Required fields are highlighted in green

1B. Transformer

2B. Data Collection

Please enter all of the known data. At a minimum, we need your Available bolted fault current (S3) at the Service if you don't have a transformer OR your transformer Size (T2), Secondary Voltage (T3) and Impedance (T5) to proceed with the calculations.

For T5. Impedance, please enter a percentage. It will be converted to a decimal value when performing the calculation. (Example: Entered 5.5% will be converted to 0.055).

If you know your Available Bolted Fault Current at the Load (SCC), hit the close button below and enter the value in Step 5 Short Circuit Current Value in the main window.

To calculate your Incident Energy value fill in the circuit breaker data below.

The required values are highlighted in green.

Service
Arc-Flash Calculator - Littelfuse (2)
Transformers
Arc-Flash Calculator - Littelfuse (3)
%
Circuit Breaker
Arc-Flash Calculator - Littelfuse (4)
* CB Mechanical clearing time, including tripping and clearing times.
65 5.4 5.4 3.1 3.1 3.0 -
55 4.6 4.6 2.7 2.7 2.5 -
45 3.8 3.8 2.2 2.2 2. -
35 2.9 2.9 1.7 1.7 1.5 8.1
30 - - - - - 7.0
25 2.1 2.1 1.2 1.2 1.1 5.8
20 - - - - - 4.6
15 1.2 1.2 0.8 0.8 0.6 3.5
10 0.8 0.8 0.5 0.5 0.4 2.3
7.5 0.6 0.6 0.4 0.4 0.3 1.8
5 - - - - - 1.2
65 10.8 10.8 6.2 6.2 6.0 -
55 9.2 9.2 5.3 5.3 5.0 -
45 7.5 7.5 4.4 4.4 4.0 -
35 5.8 5.8 3.4 3.4 3.1 16.2
30 - - - - - 13.9
25 4.2 4.2 2.4 2.4 2.2 11.6
20 - - - - - 0.3
15 2.5 2.5 1.4 1.4 1.3 7.0
10 1.7 1.7 1.0 1.0 0.8 4.7
7.5 1.3 1.3 0.8 0.8 0.6 3.5
5 - - - - - 2.3
65 16.2 16.2 9.3 9.3 8.9 -
55 13.7 13.7 8.0 8.0 7.4 -
45 11.3 11.3 6.5 6.5 6.0 -
35 8.7 8.7 5.1 5.1 4.6 24.3
30 - - - - - 20.9
25 6.2 6.2 3.7 3.7 3.2 17.4
20 - - - - - 13.9
15 3.8 3.8 2.3 2.3 1.9 10.4
10 2.5 2.5 1.5 1.5 1.2 7.0
7.5 1.9 1.9 1.1 1.1 0.9 5.3
5 - - - - - 3.5
65 62.2 41.1 12.4
55 52.9 34.9 10.6
45 43.5 28.7 8.7
35 34.1 22.5 6.8
25 24.6 16.2 4.9
15 14.9 9.9 3.0
10 10.1 6.6 2.0
7.5 7.6 5.0 1.5
65 107.9 71.2 21.6
55 91.3 60.3 18.3
45 74.8 49.4 15.0
35 58.2 38.4 11.6
25 41.7 27.5 8.3
15 25.0 16.5 5.0
10 16.7 11.0 3.3
7.5 12.6 8.3 2.5
65 59.3 39.1 11.9
55 49.6 32.8 9.9
45 10.1 26.5 8.0
35 30.7 20.3 6.1
25 21.5 14.2 4.3
15 12.5 8.2 2.5
10 8.1 5.4 1.6
7.5 6.0 3.9 1.2
35 162.2 107.0 32.4
30 139.0 91.7 27.8
25 115.8 76.5 23.2
20 92.7 61.2 18.5
15 69.5 45.9 13.9
10 46.3 30.6 9.3
7.5 34.8 22.9 7.0
5 23.2 15.3 4.6
Arc-Flash Calculator - Littelfuse (2024)

References

Top Articles
Latest Posts
Article information

Author: Msgr. Refugio Daniel

Last Updated:

Views: 6552

Rating: 4.3 / 5 (54 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Msgr. Refugio Daniel

Birthday: 1999-09-15

Address: 8416 Beatty Center, Derekfort, VA 72092-0500

Phone: +6838967160603

Job: Mining Executive

Hobby: Woodworking, Knitting, Fishing, Coffee roasting, Kayaking, Horseback riding, Kite flying

Introduction: My name is Msgr. Refugio Daniel, I am a fine, precious, encouraging, calm, glamorous, vivacious, friendly person who loves writing and wants to share my knowledge and understanding with you.